QMAX Coolant Reroute 90-05 MX5 Miata
Qmax Reroute Features
Internally multi axis machined and radiused to maximize coolant velocity which is key to improving cooling efficiency
Retain the use of your EGR pipe for emissions or CEL
The OEM coolant temp sensor location is retained so the wiring harness does not need to be modified
Spare 1/8 NPT ports are provided for aftermarket coolant temp, turbo feed or coolant pressure sensors
All important hardware is stainless steel to increase service life
High flow thermostat with same flow area as OEM
Simple sealed adapter housing eliminates gaskets and finicky, leak prone threaded fittings. ZERO LEAKS!
Convenient bleed port allows system bleeding with car level if you have COPS ignition
Integrated thermostat housing for easy fitment and improved reliability
Optional head block off plate:
The kit includes a block off plate which retains the OEM water neck on the front of the engine. If you plan to remove the water neck, add the optional cylinder head block off plate. Please note this is a DIY add-on – if you wish to remove your front water neck you’re on your own!
Contents of QMAX Reroute kit – 100% complete kit, nothing else needed to install!
1x Reroute housing, Supermiata, 7075 T-6
1x Thermostat cover, Supermiata, 7075 T-6
1x (optional) Head coolant port block off plate, Supermiata, 7075 T-6
1x Coolant neck block off plate, Supermiata, 7075 T-6
1x M8 x 1.25 x 20mm rear housing bolt
3x M6 x 1 x 25mm BHCS, black oxide
1x 1- 11/16 inch retaining ring, HO-168SS
3x 1/8 NPT plugs, SS
1x Bleed screw assy Wilwood 220-0627
1x Worm drive hose clamp, 5/8″ Breeze 9416, liner SS
2x Worm drive hose clamp 1.25″, Breeze 9424, liner SS
1x 3/8″ NPT – 5/8″ hose barb, brass
1x M16 x 1.5 drain plug, zinc
1x 1.25″ reinforced silicone hose, 44″
1x 195* stainles steel high-flow thermostat (use Motorad/Stant 45849 for replacements. Alternatively, use Motorad/Stant 45848 if you want to run a 180* thermostat)
1x Sealant, Permatex 22071
Qmax Reroute Features
Internally multi axis machined and radiused to maximize coolant velocity which is key to improving cooling efficiency
Retain the use of your EGR pipe for emissions or CEL
The OEM coolant temp sensor location is retained so the wiring harness does not need to be modified
Spare 1/8 NPT ports are provided for aftermarket coolant temp, turbo feed or coolant pressure sensors
All important hardware is stainless steel to increase service life
High flow thermostat with same flow area as OEM
Simple sealed adapter housing eliminates gaskets and finicky, leak prone threaded fittings. ZERO LEAKS!
Convenient bleed port allows system bleeding with car level if you have COPS ignition
Integrated thermostat housing for easy fitment and improved reliability
Optional head block off plate:
The kit includes a block off plate which retains the OEM water neck on the front of the engine. If you plan to remove the water neck, add the optional cylinder head block off plate. Please note this is a DIY add-on – if you wish to remove your front water neck you’re on your own!
Contents of QMAX Reroute kit – 100% complete kit, nothing else needed to install!
1x Reroute housing, Supermiata, 7075 T-6
1x Thermostat cover, Supermiata, 7075 T-6
1x (optional) Head coolant port block off plate, Supermiata, 7075 T-6
1x Coolant neck block off plate, Supermiata, 7075 T-6
1x M8 x 1.25 x 20mm rear housing bolt
3x M6 x 1 x 25mm BHCS, black oxide
1x 1- 11/16 inch retaining ring, HO-168SS
3x 1/8 NPT plugs, SS
1x Bleed screw assy Wilwood 220-0627
1x Worm drive hose clamp, 5/8″ Breeze 9416, liner SS
2x Worm drive hose clamp 1.25″, Breeze 9424, liner SS
1x 3/8″ NPT – 5/8″ hose barb, brass
1x M16 x 1.5 drain plug, zinc
1x 1.25″ reinforced silicone hose, 44″
1x 195* stainles steel high-flow thermostat (use Motorad/Stant 45849 for replacements. Alternatively, use Motorad/Stant 45848 if you want to run a 180* thermostat)
1x Sealant, Permatex 22071
Qmax Reroute Features
Internally multi axis machined and radiused to maximize coolant velocity which is key to improving cooling efficiency
Retain the use of your EGR pipe for emissions or CEL
The OEM coolant temp sensor location is retained so the wiring harness does not need to be modified
Spare 1/8 NPT ports are provided for aftermarket coolant temp, turbo feed or coolant pressure sensors
All important hardware is stainless steel to increase service life
High flow thermostat with same flow area as OEM
Simple sealed adapter housing eliminates gaskets and finicky, leak prone threaded fittings. ZERO LEAKS!
Convenient bleed port allows system bleeding with car level if you have COPS ignition
Integrated thermostat housing for easy fitment and improved reliability
Optional head block off plate:
The kit includes a block off plate which retains the OEM water neck on the front of the engine. If you plan to remove the water neck, add the optional cylinder head block off plate. Please note this is a DIY add-on – if you wish to remove your front water neck you’re on your own!
Contents of QMAX Reroute kit – 100% complete kit, nothing else needed to install!
1x Reroute housing, Supermiata, 7075 T-6
1x Thermostat cover, Supermiata, 7075 T-6
1x (optional) Head coolant port block off plate, Supermiata, 7075 T-6
1x Coolant neck block off plate, Supermiata, 7075 T-6
1x M8 x 1.25 x 20mm rear housing bolt
3x M6 x 1 x 25mm BHCS, black oxide
1x 1- 11/16 inch retaining ring, HO-168SS
3x 1/8 NPT plugs, SS
1x Bleed screw assy Wilwood 220-0627
1x Worm drive hose clamp, 5/8″ Breeze 9416, liner SS
2x Worm drive hose clamp 1.25″, Breeze 9424, liner SS
1x 3/8″ NPT – 5/8″ hose barb, brass
1x M16 x 1.5 drain plug, zinc
1x 1.25″ reinforced silicone hose, 44″
1x 195* stainles steel high-flow thermostat (use Motorad/Stant 45849 for replacements. Alternatively, use Motorad/Stant 45848 if you want to run a 180* thermostat)
1x Sealant, Permatex 22071