SuperMiata Adjustable End Links
Sold in pairs
Supermiata adjustable end links for the Miata allow you to remove any preload and compensate for ride height changes with your standard or aftermarket anti-roll (sway) bars. You can also fine tune the length so the angle of the link is a vertical as possible with the car at resting ride height. Included spacers allow further control of end link angle. Proprietary PTFE coated rod end bearings, engineered and manufactured just for these end links. Urethane end links will bind at full compression which adversely affect anti-roll bar spring rate. These links work with any and every sway bar on the market.
Proprietary billet 1045 steel rod body
Proprietary PTFE coated bushing, heat treated, hard chromed 52100 steel ball
Proprietary Billet 7075-T6 orange anodized aluminum counter threaded turnbuckles
Proprietary chamfered spacers increase maximum angularity
Turnbuckle style center so you can adjust the length without removing the links
5mm & 10mm zinc plated 1045 steel spacers
Long and short through bolts to reduce interference with control arm and damper body
17mm wrench fits everything
10.9 zinc plated hardware
Three year limited warranty
Sold in pairs
Supermiata adjustable end links for the Miata allow you to remove any preload and compensate for ride height changes with your standard or aftermarket anti-roll (sway) bars. You can also fine tune the length so the angle of the link is a vertical as possible with the car at resting ride height. Included spacers allow further control of end link angle. Proprietary PTFE coated rod end bearings, engineered and manufactured just for these end links. Urethane end links will bind at full compression which adversely affect anti-roll bar spring rate. These links work with any and every sway bar on the market.
Proprietary billet 1045 steel rod body
Proprietary PTFE coated bushing, heat treated, hard chromed 52100 steel ball
Proprietary Billet 7075-T6 orange anodized aluminum counter threaded turnbuckles
Proprietary chamfered spacers increase maximum angularity
Turnbuckle style center so you can adjust the length without removing the links
5mm & 10mm zinc plated 1045 steel spacers
Long and short through bolts to reduce interference with control arm and damper body
17mm wrench fits everything
10.9 zinc plated hardware
Three year limited warranty
Sold in pairs
Supermiata adjustable end links for the Miata allow you to remove any preload and compensate for ride height changes with your standard or aftermarket anti-roll (sway) bars. You can also fine tune the length so the angle of the link is a vertical as possible with the car at resting ride height. Included spacers allow further control of end link angle. Proprietary PTFE coated rod end bearings, engineered and manufactured just for these end links. Urethane end links will bind at full compression which adversely affect anti-roll bar spring rate. These links work with any and every sway bar on the market.
Proprietary billet 1045 steel rod body
Proprietary PTFE coated bushing, heat treated, hard chromed 52100 steel ball
Proprietary Billet 7075-T6 orange anodized aluminum counter threaded turnbuckles
Proprietary chamfered spacers increase maximum angularity
Turnbuckle style center so you can adjust the length without removing the links
5mm & 10mm zinc plated 1045 steel spacers
Long and short through bolts to reduce interference with control arm and damper body
17mm wrench fits everything
10.9 zinc plated hardware
Three year limited warranty